Adjustable Floor Stand for Light Therapy Panels
- Rolling floor stand
- Height and tilt adjustment
- Panel mounting support
- Standing or reclined setup
- Clinic workflow friendly
Adjustable Floor Stand for Light Therapy Panels Specifications
Review the table for stable panel mounting, including frame material, angle range, bracket fit, wheel design, assembly steps, and compatibility notes.
Parameter
Specification
Product Name
Red Light Therapy Panel Stand - Rolling Adjustable Floor Stand
Positioning
Gas-lift height, 360-degree horizontal swivel, vertical tilt
Top Arm Length
52 cm / 20.47 in
Upper Linkage
26 cm / 10.24 in
Post Adjustable Range
65.5-94.5 cm / 25.79-37.2 in
Gas-Lift Height Center
108-137 cm / 3.54-4.49 ft
Mount Plate Width
45 cm / 17.72 in
Base Size
69.5 x 72.5 cm / 27.36 x 28.54 in
Base Beam Height
16.5 cm / 6.5 in with casters
Rotation / Tilt
360-degree horizontal rotation + vertical tilt
Material / Color
Steel / white
Compatibility
Youlumi IRP010 series; bracket/hole pattern required
Included Items
Stand body, 4 locking casters, mounting bracket, hardware, manual
Adjustable Floor Stand for Light Therapy Panels Features
Built for stable panel mounting, this adjustable floor stand combines compatible panel light with a rolling steel frame for clinics, spas, and gyms.
Multi-Wavelength
The stand has no LEDs; it positions compatible panels so red and near-infrared programs stay stable for standing or reclined use.
Uniform Light Distribution
By holding the panel at a repeatable angle, the stand helps keep exposure steadier across panel height, angle, and body zones.
Adjustable Floor Stand for Light Therapy Panels Advantages
Its value is workflow control: safer panel positioning, repeatable angles, cleaner cable routing, and easier room sharing.
Convenient Operation
Daily use centers on room setup: lock the casters, set height and tilt, attach the panel, and route cables. Staff can repeat the same placement while keeping users clear of moving parts.
High Efficiency Therapy
Efficiency comes from less lifting and more repeatable placement. Staff spend less time lifting panels and more time keeping sessions consistent for different users.
Adjustable Floor Stand for Light Therapy Panels Structure
The structure supports stable routines, easier handling, and clear buyer presentation for stable panel mounting.
LED Light Source
This floor accessory has no light engine. It secures compatible panels, preserves rear ventilation, and keeps beam direction predictable in shared rooms.
LED Matrix Layout
Efficient Cooling System
Thermal performance depends on the mounted panel, so the stand should leave vents open, avoid fabric blockage, and keep brackets stable during longer room programs.
Heat Sink Structure
Adjustable Floor Stand for Light Therapy Panels Instructions
Set the floor stand on a level surface, lock height and angle before mounting the panel, check balance, and move it only after power is off.
Usage Guidelines
Use the stand to position panels for standing, seated, or reclined routines, keeping wheels locked and cables clear during operation.
Level Floor
Place the stand on a flat floor and avoid thick rugs or slopes that could affect balance when a panel is mounted.
Lock Position
Adjust height, tilt, or rotation before the session, then tighten knobs and brakes so the panel stays stable.
Cable Clearance
Route panel cables along the stand or away from walkways, reducing trip risk in clinics, gyms, or home rooms.
Safe Move
Power off the panel and unlock wheels only after the routine ends, then push the stand slowly with both hands.
Usage Steps
Stand setup should come before therapy: level the base, mount the panel, lock the angle, manage cables, run the session, and move it safely.
Level base
Attach panel
Set height
Start session
Route cable
Lock angle
End power
Unlock wheels
Move slowly
Adjustable Floor Stand for Light Therapy Panels Applications
Use this accessory when clinics, spas, and gyms need stable panel mounting with safer movement, cleaner positioning, and better workflow.
Wellness Centers
Wellness centers can apply it in spa rooms and full-body panel installations. Staff can explain setup quickly, keep sessions calm, and repeat the same user flow across rooms.
Physiotherapy Clinics
Physiotherapy clinics can use it for rooms that reposition panels for different users. Placement, cleaning, and timing notes help staff standardize service routines.
Adjustable Floor Stand for Light Therapy Panels FAQ
FAQ copy for the floor stand covers panel fit, wheel locking, cable routing, cleaning, and shared-room workflow.
Q1: Which panels can be paired with the floor stand?
Confirm panel weight, bracket holes, cable direction, and compatibility notes before installation or bulk ordering.
Q2: How does the rolling stand improve room workflow?
It keeps panel height and angle repeatable while reducing manual lifting in standing, seated, or reclined sessions.
Q3: What should installers check after floor-stand assembly?
Lock the casters, tighten the bracket, test tilt or swivel movement, and keep cables away from walking paths.
Get Youlumi Red Light Therapy Solution
Tell us your product idea, target market, and usage scenario. Youlumi will provide device suggestions, customization plans, samples, and production support.
*We respect your confidentiality and all information is protected.