High-Density Red Light Therapy Belt for Back Pain
- High-density back coverage
- Lower-back routine support
- Secure waist strap fit
- Seated or reclined use
- Red and NIR LED layer
High-Density Red Light Therapy Belt for Back Pain Specifications
Review the table for lower-back support routines, including wavelength mix, coverage, power class, size, controls, material, accessories, and packaging needs.
Parameter
Specification
Model No.
YL-IRW-003
Product Type
High-density red light therapy wrap
Dimensions
80 x 16 cm / approx. 31.5 x 6.3 in
LED Quantity / Type
180 diodes, SMD5050 3 chips in 1
Wavelength Ratio
660nm:850nm chip ratio = 1:2
Power Consumption
P1-P5: 5.5W / 10.5W / 15W / 20W / 25W +/-5%
Irradiance
>130 mW/cm2 at 0 in
Controller
Timer 5-30 min, P1-P5 intensity, 10Hz/40Hz/steady pulse
Wavelength Modes
Red / NIR / both
Input
DC12V / DC5V via USB
Beam Angle
120 degrees
Net Weight
Approx. 0.40 kg
Housing Material
Fabric
Operating Temperature
-20 C to +40 C
Rated Lifespan
>50,000 hours
Warranty
1 year
High-Density Red Light Therapy Belt for Back Pain Features
Built for lower-back support routines, it pairs red and near-infrared light with dense lower-back coverage for lumbar area and lower back.
Multi-Wavelength
Red and near-infrared light supports surface care and deeper recovery-style positioning across lumbar area and lower back.
Uniform Light Distribution
The layout helps spread light across lumbar area and lower back, keeping coverage steadier while the user maintains one position.
High-Density Red Light Therapy Belt for Back Pain Advantages
Its value is practical: repeatable lumbar placement, simple setup, clear guidance, and buyer-friendly positioning.
Convenient Operation
Users can align the belt with the lumbar zone, fasten gently, set timing, and relax. The flow is easy to describe in manuals, retail pages, and staff training materials.
High Efficiency Therapy
By matching coverage to lumbar area and lower back, the device supports stable lower-back placement while seated or reclined. Users complete sessions with fewer placement changes.
High-Density Red Light Therapy Belt for Back Pain Structure
The structure supports stable routines, easier handling, and clear buyer presentation for lower-back support routines.
LED Light Source
The light source is arranged for lumbar area and lower back, using red and near-infrared light in a layout matched to target distance, comfort, and buyer-facing performance copy.
LED Matrix Layout
Efficient Cooling System
Heat management depends on breathable contact and dry textile care. Keep vents or fabric edges clear, avoid covering the product, and let it cool before storage.
Heat Sink Structure
High-Density Red Light Therapy Belt for Back Pain Instructions
Place the back-care belt across the lower or upper back, secure it gently, choose a steady timer, and stay seated or reclined during use.
Usage Guidelines
Support the back with a chair or cushion, keep the belt flat against the target area, and avoid twisting the spine while the lights are on.
Back Support
Use a chair, bench, or pillow to support posture so the belt stays in place without forcing the user to hold tension.
Panel Contact
Keep the illuminated section flat across the lower back, upper back, or side area, avoiding folds that create uneven pressure.
Relaxed Routine
Start the timer only after the user is settled, then encourage steady breathing and limited movement until the session ends.
After Use
Remove the belt slowly, unplug the controller, wipe the inner surface, and let the strap dry before storage.
Usage Steps
Back routines work best when posture is supported, the belt sits flat, timing is controlled, comfort is checked, and the strap is cleaned afterward.
Support back
Place belt
Smooth contact
Breathe steadily
Begin session
Set timer
Finish care
Unplug cord
Dry strap
High-Density Red Light Therapy Belt for Back Pain Applications
Use it for lower-back support routines in physiotherapy and back-care programs, giving buyers a clear routine for lumbar area and lower back.
Wellness Centers
Wellness centers can apply it in back-care packages and recovery memberships. Staff can explain setup quickly, keep sessions calm, and repeat the same user flow across rooms.
Physiotherapy Clinics
Physiotherapy clinics can use it for lumbar routines with stable wearable placement. Placement, cleaning, and timing notes help staff standardize service routines.
High-Density Red Light Therapy Belt for Back Pain Certifications
Certification support includes FDA, CE and RoHS documentation, complemented by customized labels, user guides and packaging resources for retail readiness.
FISCAL YEAR 2025 Medical Device Registration and Listing
FISCAL YEAR 2025 Medical Device Registration and Listing
STC
High-Density Red Light Therapy Belt for Back Pain FAQ
FAQ copy for the high-density back belt covers setup, comfort, cleaning, OEM options, and how users apply it to lumbar area and lower back.
Q1: How should the back belt fit the lumbar area?
It should sit evenly across the lower back without pressure points, with the user seated or reclined comfortably.
Q2: Which back-care routine suits this belt?
It suits lower-back support routines around lumbar area and lower back, especially when stable lumbar placement matters.
Q3: What OEM details can be planned for the back belt?
Brand labels, care tags, carton artwork, manuals, accessories, and fabric labels, user instructions, cartons, and OEM documentation can be planned after MOQ review.
Get Youlumi Red Light Therapy Solution
Tell us your product idea, target market, and usage scenario. Youlumi will provide device suggestions, customization plans, samples, and production support.
*We respect your confidentiality and all information is protected.